D-Link DWL-8610AP/ESG

Wireless AC1750 Dual-band Gigabit PoE Access Point D-Link DWL-8610AP/ESG

-Wireless AC1750 Dual-band Gigabit PoE Access Point (2.4GHz: 450Mbps & 5GHz: 1300Mbps; 5dBi internal antenna for 2.4GHz, 6.5dBi internal antenna for 5GHz, 802.3at PoE+, PoE injector is NOT included), Standalone/Managed mode.

-The DWL-8610AP/ESG Unified Wireless Concurrent Dual Band 802.11ac Access Point combines the cutting edge wireless speeds of 802.11ac with the unparalleled flexibility and scalability of D-Link’s Unified Wireless Solution. 

-The DWL-8610AP/ESG is designed to support small to medium business or enterprise environments by providing network administrators with secure and manageable dual-band wireless network options. 

-The DWL-8610AP/ESG delivers reliable, highspeed wireless performance using the latest 802.11ac standards. It supports maximum wireless signal rates of up to 450 Mbps over the 2.4 GHz band, and 1300 Mbps over the 5 GHz band1.

-Versatile and powerful, the DWL-8610AP/ESG can be flexibly deployed as an autonomously managed, standalone wireless access point, or as a centrally managed access point controlled by a D-Link Unified Wireless Switch or Wireless Controller. 

-Businesses can start with standalone mode deployment, and then migrate to a centrally managed system anytime later.

Greater Reach and Flexibility

-The DWL-8610AP/ESG supports a variety of advanced radio management features to get the most of the wireless network and maximize user experience. 

-Band steering detects and steers 5 GHz capable clients away from the overcrowded 2.4 GHz network to the less congested 5 GHz network. 

-Load balancing ensures maximum performance by limiting the maximum number of users per access point. 

-Beamforming technology enables even greater reach.

-By focusing the wireless signal at connected devices, it guarantees continuous fast wireless speeds, even under heavy network utilization or in areas that have bad wireless signal.

Self-Configuring Cluster

-For small businesses that need to deploy multiple APs but lack the resources to tackle the complicated task of network management, the DWL-8610AP/ESG’s self-configuring cluster feature offers the ideal solution. 

-When a small number of DWL-8610AP/ESG are deployed on the network, they may be configured to form a self-configuring cluster. 

-Once the administrator configures one access point, the same configuration can then be applied to all remaining APs. 

-Up to 16 APs may be used to form a cluster, making setting up your business wireless network a simple and easy.

Centrally Manage your Wireless Network

-When working in conjunction with a D-Link Unified Switch or Wireless Controller, the DWL-8610AP/ESG, like other D-Link Unified Access Points, may be centrally managed. -This allows up to 256 D-Link Unified Access Points to be deployed and managed easily and efficiently. 

-Once the APs are discovered by the switch/controller, the administrator can push a specific set of configurations onto them, rather than having to do so one by one. 

-In addition, RF resource management and security are also managed centrally, thus allowing the administrator to preemptively identify potential deficiencies and weaknesses in the network.

Automatic RF Management Saves Power and Money

-When a number of access points are deployed close to each other, interference may result if proper RF management isn’t implemented. 

-When a DWL-8610AP/ESG senses a neighbor nearby, it can automatically select a non-interfering channel. 

-This greatly reduces RF interference and will allow the administrator to deploy APs more densely. 

-To further minimize interference, when a nearby AP is operating on the same channel, the DWL-8610AP/ESG will automatically lower its transmission power2. 

-At any time should the nearby AP drop from the network, the DWL-8610AP/ESG will increase its transmission power to expand coverage.

Quality of Service for Increased Connectivity

-The DWL-8610AP/ESG supports 802.1p Quality of Service (QoS) for enhanced throughput and better performance of time-sensitive traffic like VoIP and streaming DSCP. 

-The DWL-8610AP/ESG is WMM-certified, so in the event of network congestion, time-sensitive traffic can be given priority ahead of other traffic.

-Furthermore, when a number of DWL-8610AP/ESG are in close proximity with each other, an access point will refuse new association requests once its resources are fully utilized. 

-Instead, the association request will be picked up by a neighboring unit. 

-This feature ensures that no single AP is overburdened while others nearby sit idle.

Security

The DWL-8610AP/ESG supports the latest standards in Wi-Fi security, including WEP, WPA, WPA2, and 802.1X. In addition, it supports up to 16 Virtual Access Points (VAP) per radio, for a total of 32 VAPs, which allows the administrator to assign different access privileges to different groups of users. When Station Isolation is enabled, the AP blocks communication between wireless clients on the same radio and VAP. Rogue APs in the network can be easily detected, and the administrator will be immediately notified of any security threat. When used together with D-Link’s Wireless Controller or Unified Switch, the security can be enhanced further.

Easy and Convenient Installation

-With internal antennas and a simple housing, the DWL-8610AP/ESG can be installed on a wall or ceiling and blends in with most office environments.

-Enclosed in a plenum-rated chassis, the DWL-8610AP/ESG adheres to strict fire regulations for placement in air passageways. 

-For easy installation, it has integrated 802.3at Power over Ethernet (PoE) support, allowing installation of this device in areas where power outlets are not readily available.