Model sản phẩm:

TX-124R

Battery Operated Flame Sensor
Giá bán:
Tính năng chính:

Battery Operated Flame Sensor TAKEX TX-124R

- Flame sensor wireless type, DC3V (CR-123A) battery not included

- General Description: TX-124R detects ultraviolet rays contained in flames and activates an external output. It is compatible with most of major wireless transmitters powered by DC3V battery. The weather proof construction of the housing allows for use outdoors.

- Various Sensitivity Levels Selectable: TX-124R has 2 sensitivity setting (H or L) and 4 detection timer (1, 6, 15 or 30 sec). A combination of the two parameters provides 8 sensitivity levels which enables the sensor to fit with various environments and conditions.

- High Sensitivity: TX-124R detects a flame of 60cm(2’75”) from 30m(66’) away.

- Major Funtions

   + Operation LED (can be disabled by DIP switch).

   + Battery holder for 2 x CR-123A.

   + Area masking sheet.

 


Camera quan sát   Giao hàng toàn quốc
Camera quan sát   Giao hàng trong vòng 5h
Camera quan sát   Đổi trả hàng trong vòng 1 tháng với bất cứ lý do
Camera quan sát   Thanh toán khi nhận hàng (COD) hoặc chuyển khoản
Camera quan sát   Tư vấn: 0903 189 128

 

 

Detection system Ultraviolet rays detection (Detected wave length: 185 to 260nm)
Detection Area Distance
33ft. (10 m): (Gas Flame of Lighter in front of sensor: approx. : 2.75' (7cm))
100ft. (30 m): (Flame of N-heptane on fire plate 15cm × 15cm: approx. : 23.62' (60cm))
The flame size is rough.
Angle: Vertical: approx. 75° (upward: 15°, downward: approx. 60°) Horizontal: approx. 100°.
Adjustment range: Vertical: downward 90° (horizontal-vertical) Horizontal: 180°
Sensitivity adjustment Sensitivity: H (100%), L (50%) [selectable by switch]
Detection timer: 1 sec, 6 sec, 15 sec, 30 sec [selectable by switch]
Supply voltage (Red/Black wires) DC3V (CR-123A)
Current consumption Standby: 55μA Max, Detection: 1mA Max
Detection output (Blue/White wires)
Solid State Switch N.C 3VDC ・ 0.01A Max
Output when detecting Ultraviolet, Real time + delay time 2 sec
Operation LED Detection: Red LED
Rael time + delay time 2 sec
Ambient temperature -4°F to +122°F (-20°C to 50°C)
Installation Indoor, Outdoor
Weight Approx. 17.9 oz (510g)
Appearance - Sensor Part: PC resin (White)
- Back box: AES resin (White)
Optional - Tapping Screw φ 6 × 30 (SUS): 4pcs
- Battery holder (2 x CR-123A): 1pc
- Area mask seal: 1pc

 

 

 

Mời bạn đánh giá hoặc đặt câu hỏi về TX-124R

Top