phone

Giỏ hàng ( 0 )

phone

Tổng đài: 0903 189 128

Phụ kiện Takex

Model sản phẩm:

PXB-100ATC-KH(E)

Photoelectric Beam Sensor

Giá bán: 9.283.000^đ

Tính năng chính:

Photoelectric Beam Sensor TAKEX PXB-100ATC-KH(E)

- Anti-Crawl Detection: Upper and lower beam individually detects the objects and issues a signal only by blocking each beam.

- AT/HF Separate Output

+ AT output: OR-gated by upper and lower beam.

+ HF output: AND-gated.

- Synchronized High Power Beam: By synchronizing the timing of transmitting and receiving beam, the stacking system will be more reliable.

- Double Modulation

+ Double modulated beams are designed to distinguish the true beam signal from accidental or deliberate interference from sunlight, car headlights and other artificial light sources.

+ This increases the reliability in the outdoor security system.

- Quad High Power Beam

+ The beam power is 100 times of the minimum requirement.

+ The beam distance is 10 times of the described specification.

+ This high power beam also realizes the reliability against the harsh conditions like fog, snow, heavy rain.

- Ecology: RoHS adapted - Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyl, Polybrominated diphenyl ether.

- Dual Ring Sight: Enables better and clear view for easy beam alignment.

- Target Color

+ The vivid color of the internal structure can be recognized easily from the far end in the beam alignment procedure.

+ The color differs between a transmitter and a receiver which helps easy installation and checking.

- Increased Range Adjustment Allowance: Vertically ±20°compared with previous version. It may adapt to the slope installation flexibly.

- Wireless Alignment Checker: Enables easy and accurate beam alignment. (Sold separately).

- Lightning Protection

+ Minimizes the damage caused by induced lightning through wiring.

+ Rated up to 10,000V under normal mode and 15,000V under common mode.

MUA NGAY

Camera quan sát

Giao hàng toàn quốc

Camera quan sát

Giao hàng trong vòng 5h

Camera quan sát

Đổi trả hàng trong vòng 1 tháng với bất cứ lý do

Camera quan sát

Thanh toán khi nhận hàng (COD) hoặc chuyển khoản

Camera quan sát

Tư vấn: 0903 189 128

Thông số kỹ thuật

Model	PXB-100ATC-KH
Detection system	Near infrared pulsed beam interruption system (Anti-crawling, Anti-corrosion)
Infrared beam	Double modulation pulsed beam by LED
Protection distance	Outdoor 330' (100m) or less
Response time	AT output : 0.05sec by upper/lower level simultaneous interruption 0.1/0.2/0.3/0.5sec by either level interruption HF output: 0.05sec by upper/lower level simultaneous interruption
Power supply	12 to 30V DC (Non-polarity)
Current consumption	Transmitter: 27mA Receiver: 48mA
Alarm output	Dry contact relay output N.O./N.C. selectable Contact action: Interruption time (Min.2sec.) Contact capacity: 30V (AC/DC) 0.25A (resistive load) Protective resistor
Environmental output	Dry contact relay output N.O./N.C. selectable Action: Activated when weather condition gets worse (Min.5sec.) Contact capacity: 30V (AC/DC) 0.25A (resistive load) Protective resistor
Alarm LED	Red LED (Receiver) ON: when an alarm is initiated
Attenuation LED	Red LED (Receiver) ON : when beam is attenuated
Ambient temperature range	-31°F to +151°F (-35°C to +66°C)
Beam adjustment	Horizontal: ±90°, Vertical: ±20°
Functions	Modulated beam frequency selection,Tone indicator, Environmental module, Beam power selection,Transmitting power adjutment, Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper, Response time adjustment, Upper/lower beam switch Wireless checker, LED light turn-off function
Mounting positions	Inside the housing
Wiring	Terminals
Weight	Transmitter: 12.6oz (360g) Receiver: 15.8oz (450g)

Mời bạn đánh giá hoặc đặt câu hỏi về PXB-100ATC-KH(E)

Top