Description	Sensor Speaker
Model number	PV-12
Detection system	Passive infrared
Detection Area	Wide angle (max. : 12m, 39')
Sensitive zone	24 zones (12 pairs)
Sensitivity volume	Variable 20 to 180% (medium: 100%)
Power voltage	DC12V+/-2V (non-polarity)
Current consumption	(Standing by) below 20mA (Operating) below 500mA (Max. Vol.)
Output signal	Dry contact relay : 1C Contact capacity : AC/DC 30V, 0.5A (Resistive load) Output time : eight (8) seconds
Power timer	Sixty (60) seconds (no detection, recording O.K.)
Sound synthesis method	ADM method
Record method	Built-in condenser microphone
Record/Playback time	Eight (8) seconds Sound memory capacity : 256 Kbit S-RAM
Record memory back-up time	More than 20 days with non-electrified conditions (temp.=25C, electrified over 30 minutes).
Sound output motion	One-shot eight (8) seconds playback motion by detection signal (no retrigger during playback).
Sound output power	Max. 2W Over 100dB (1m ahead) at a right record level.
Sound volume adjustment	Continuously variable from 0 to max.
Indication LED	[ Record ] Level indicator xfunction Right: blink, underrate: LED on, overrate: LED off. [ Playback ] LED on during playback.
Ambient temperature	-20C to +50C (no dew, no frost)
Installation place	Indoor/outdoor (rainproof)
Wiring method	Lead wire (5 core), 40' / 1m attached.
Installation Method	Screw on flange.
Weight	1050g, including wire / 100g.
External appearance	Black (PC resin)
Attachments	Installation flange, fixing screws.