phone

Giỏ hàng ( 0 )

phone

Tổng đài: 0903 189 128

Phụ kiện Takex

Model sản phẩm:

PR-30BE

Photoelectric Beam Sensor

Giá bán: 13.071.000^đ

Tính năng chính:

Photoelectric Beam Sensor TAKEX PR-30BE

- The newly developed PR-30BE, adopting Time of Flight technology, can protect 30m (outdoor) with one side wiring.

Feature

- Easy Installation: As wiring is needed only on the sensor unit (one side), you can use it in places where it is difficult to wire on both sides. One-side wiring reduces time and cost of installation sighificantly.

- More Reliable Protection (Time Of Flight): Adopting ToF technology makes the detection more secure regardless of environment and material/color of the object, by avoiding lost alarms caused by wrap-around of the reflected beam near the center of the detection area.

- For Indoor And Outdoor Applications: This sensor can be used both indoor and outdoor. Maximum detection distance can be 40m for indoor applications (hood of reflector is detachable).

- Easy Beam Alignment:Beam alignment can be adjusted on the sensor unit side only by utilizing dual ring viewfinder, monitor output and new sound check function. (Intermittent and continuous tone).

- Flexible Protection Area Setting: The lens is adjustable horizontally (+/-90 degrees) and vertically (+/-5 degrees) by thumbscrew without screw driver, allowing the unit to work in all directions.

- Response Time Adjustment: Response time can be adjusted by DIP switch with 4 steps (0.05 / 0.1 / 0.25/0.5 sec.) to reduce false alarms depending on the location.

- Minimum Operational Distance: Even narrow zones can be protected with minimum operational detection distance of 0.5m, widening the area of applications.

- Easy Operation Check: Alarm LED (red), attenuation LED, and sound check are equipped for quick and easy operation check. (After closing the cover, the sensor will enter walk test mode for a period of 5 minutes. During this time, a sounder will activate upon detection. The walk test mode will automatically terminate after 5 minutes.).

- Option Accessories: L fitting (BL-11) is available as option to mount the reflector for protection along the wall.

MUA NGAY

Camera quan sát

Giao hàng toàn quốc

Camera quan sát

Giao hàng trong vòng 5h

Camera quan sát

Đổi trả hàng trong vòng 1 tháng với bất cứ lý do

Camera quan sát

Thanh toán khi nhận hàng (COD) hoặc chuyển khoản

Camera quan sát

Tư vấn: 0903 189 128

Thông số kỹ thuật

Detection system	Near infrared beam interruption system (reflective)
Protection distance	Outdoor 1.7 to 100' (0.5 to 30m) Indoor 1.7 to 135' (0.5to 40m)
Supply voltage	10.5V to 30V DC (Non-polarity) (Class 2 powered device)
Current consumption	200mA or less 160 mA or less (12V DC) 80 mA or less (24V DC)
Alarm output	Dry contact relay Dry contact relay N.O. /N.C. Contact capacity : 30V (AC/DC) 0.25A or less Relay operation : Interruption time (minimum 2 secs)
Environmental output	Dry contact relay Dry contact relay N.O. /N.C. Contact capacity : 30V (AC/DC) 0.25A or less
Tamper output	Dry contact relay 1b (N/C) Action : Activated when cover is detached. Contact capacity : 30V (AC/DC) 0.25A or less
Response time	0.05/0.1/0.25/0.5sec.
Alarm LED	Red LED ON : when an alarm is initiated
Sensitivity attenuation/Environment LED	Red LED When front cover detached (when alignment) : Beam is attenuated. When front cover attached : Weather condition gets worse. (Synchronize with Env.output)
Functions	- Monitor output - Response time adjustment
Ambient temperature	-25℃ to + 60℃ (-13°F to +140°F)
Mounting position	Outdoor, Indoor
Wiring	Terminals
Weight	Sensor: 13oz (370g) Reflector: 6.7oz (190g)
Appearance	Sensor: Resin (wine red) Reflector: Resin (clear/black)

- Bảo hành: 12 tháng.

Mời bạn đánh giá hoặc đặt câu hỏi về PR-30BE

Top