PR-11BE

Photoelectric Beam Sensor

Giá bán: 3.376.000^đ

Tính năng chính:

Photoelectric Beam Sensor TAKEX PR-11BE

- The newly developed PR-11BE is suitable for both indoor and outdoor use. This beam is the first reflector beam the security industry has ever developed for outdoor applications.

Feature

- Easy Installation: As wiring is needed only on the sensor unit, you can use it in places where it is difficult to wire on two sides. One side wiring makes it possible to save time and cost of installation.

- Both Indoor And Outdoor Use Is Available: This sensor can be used both inside and outside. 2 types of attenuation sheets (for indoor and outdoor) are attached.

- Easy Beam Alignment: Beam alignment can be adjusted at the sensor side only. When adjusting beam alignment, utilize view finder, attached attenuation sheets and alarm LED.

- External Light Protection: Trouble-free condition in 50,000 lux illumination fluctuation is assured by external light compensation circuit and filter, specially designed, that cuts visible rays effectively. Excellent tolerance against sun light, automobile head light, fluorescent light or mercury light.

- Rotary Optical System: Using the adjustments, the lens can move horizontally (+/-90 degrees) and vertically (+/-10 degrees) allowing the unit to work in all directions.

- Response Time Adjustment: Response time can be adjusted by the response time adjustment potentiometer.

- Easy Operation Check: Alarm LED (red) yield quick operation check.

- Option Accessories

+ L bracket fittings (BL-11) are available for reflector mounting.

+ BP-60A pole attachment is available for sensor and reflector.

- Optional Power Supply

+ A solar power kit is an available option.

+ Contact your local TAKEX office or distributor for part numbers and technical advice.

MUA NGAY

Giao hàng toàn quốc

Giao hàng trong vòng 5h

Đổi trả hàng trong vòng 1 tháng với bất cứ lý do

Thanh toán khi nhận hàng (COD) hoặc chuyển khoản

Tư vấn: 0903 189 128

Thông số kỹ thuật

Product name	PHOTO ELECTRIC BEAM SENSOR
Model	PR-11BE
Detection system	Near infrared beam interruption system. (reflective)
Protection distance	Outdoor 3.3 to 36' (1 to 11m) Indoor 3.3 to 49' (1 to 15m)
Supply voltage	10.5V to 30V DC (Non-polarity)
Current consumption	55mA or less
Alarm output	Dry contact relay from N/O-N/C Contact capacity: 30V (AC/DC) 0.5A or less Relay operation: Interruption time (minimum 2 seconds)
Tamper output	Dry contact relay 1b (N/C) Action: Activated when cover is detached. Contact capacity: 30V (AC/DC) 0.5A or less
Response time	0.05sec to 0.7sec. (Adjustable by potentiometer)
Alarm LED	Red LED ON: when an alarm is initiated
Attenuation LED	Red LED ON: when beam is attenuated.
Functions	Monitor output
Ambient temperature range	-13F to ＋140F (－25C to ＋60C)
Mounting positions	Outdoor/Indoor
Wiring	Terminals
Weight	Sensor: 15oz (430g) Reflector: 17oz (490g)
Appearance	Sensor: PC resin (wine red) Reflector: acrylic resin (clear), AES resin (black)