Model	Triple mirror passive sensor
Model number	PIR-T40NAM (W)
Detection system	Passive infrared
Detection area	Vertical curtain protection Detection distance : Max 150’ (45m), 46 rays (23 pairs)
Power supply	9 to 28V DC (non-polarity)
Current consumption	Max. 50mA
Alarm output	- Contact method: Dry semi-conductor contact, N.C./N.O. selectable - Contact operation:    + One-shot operation when detecting intrusion    + Continuous output in the event of alignment position error    + Continuous output in the event of power voltage error - Contact rating : 24V (AC/DC) 0.25A (resistive load) (built-in contact protective resistor 3.3Ω)
External output	- Contact method: Dry semi-conductor contact N.O. - Contact operation: One-shot operation/Off delay operation selectable when detecting intrusion - Contact rating: 24V (AC/DC) 0.25A (resistive load) (built-in contact protective resistor 3.3Ω)
Tamper output	- Contact method: Dry mechanical contact, N.C. - Contact operation: Continuous output - Contact rating : 24V (AC/DC) 0.1A (resistive load) (built-in contact protective resistor 3.3Ω)
Anti-masking output	- Contact method : Dry semi-conductor contact N.C. - Contact operation : Continuosly output when an object is placed in front of the lens (until nomal recovery) - Contact rating : 24V (AC/DC) 0.25A (resistive load) (built-in contact protective resistor 3.3Ω)
Alarm LED	Red LED:    + Blinks* during warm up    + Lights up* when detecting intrusion    + Continuously blinks in the event of cover monitor error    + Continuously lit in the event of alignment position error    + Continuously blinks in the event of self diagnosis error    + Continuously lit in the event of power voltage error    + Continuously blinks in the event of Anti-masking error (* ON/OFF selectable using the mode selector)
Memory LED	Red LED: Blinks for 3 minutes during memory display, Auto reset operation either of continuous lighting for 47 minutes or blinking for 50 minutes selectable (Blinks to lights / blinks, ON/OFF selectable using the mode selector)
Functions	Sensitivity selection Operation mode selection Alarm memory LED Self diagnosis Low voltage monitoring Temperature compensation Front & back tamper LED area checker Environmental adjustment Creep zone detection Walk test mode Near area cancellation Anti-masking
Mounting height	6.6’ to 20’ (2.0 to 6.0m) (varies depending on the operation mode) - Low position mode : 6.6’ to 8.3’ (2.0 to 2.5m) (Maximum detection distance:135’ (40m)) - Middel position mode : 8.3’ to 11.5’ (2.5 to 3.5m) (Maximum detection distance:115’ (35m)) - High position mode : 11.5’ to 13’ (3.5 to 4.0m) (Maximum detection distance:100’ (30m)) - High density mode : 6.6’ to 20’ (2.0 to 6.0m) (Maximum detection distance:150’ (45m))
Area angle adjustment range	Horizontal direction : ±90° (in 5° steps) Vertical direction : 17° (no stage adjustment)
Ambient temperature range	-25 to +55°C (no condensation and freezing)
Mounting position	Indoor / outdoor wall surface: Can be mounted on poles and ceilings (or under eaves) using optional accessories
IP rating	IP55
Connections	Terminals (M2.6 self up terminal)
Weight	Approx. 600g
Appearance	Body: Resin (white), Window: Resin (white)