PIR-30WE

Passive Infrared Sensor

Giá bán: 10.542.000^đ

Tính năng chính:

Passive Infrared Sensor TAKEX PIR-30WE

- Protection Area Especially Designed To Protect From High Mounting Positions: Offering a choice of Long Range narrow field, or Mid Range Wide Angle and equipped with N.C./N.O. output, these units are ideal for camera / light activation, or as components in security systems.

- Suitable For Indoor And Outdoor Use: With a rain-proof casing, these units are suitable for both internal and external applications.

- Strong Housing Cases

+ The casings of these units are made from AES resin which improves the unit's durability and resistance to conditions such as wind, rain and direct sunlight.

+ The long steel hood helps protect the lens from direct sunlight and bird doroppings problems.

- Functions

+ L/C (LED control) function: The unit is equipped with L/C function by which the LED function can be remotely activated/de-activated. L/C function enables simple walk test functionality after unit is installed.

+ Tamper switch: The units have independent tamper outputs activated by removal of cover.

+ Sensitivity adjustment: Sensitivity is adjustable between 30% and 170%.

+ Optical Viewfinder: Attached Viewfinder enables easy set up for zone coverage.

- Rain-Proof Structure: The units are constructed with weather-resistant seals to prevent water from entering.

MUA NGAY

Giao hàng toàn quốc

Giao hàng trong vòng 5h

Đổi trả hàng trong vòng 1 tháng với bất cứ lý do

Thanh toán khi nhận hàng (COD) hoặc chuyển khoản

Tư vấn: 0903 189 128

Thông số kỹ thuật

Model	PIR-30WE
Detection system	Passive infrared
Coverage	Wide angle 100' (30m) Max. 30 Zones(60 beams)
Coverage adjustment	Vertical: 10° Horizontal: +/-5°
Mounting position	Indoor or outdoor wall
Supply voltage	9 to 30V DC (non-polarity)
Current consumption	25mA Max.
Alarm output	- Dry contact(semi-conductor) output (N.C./N.O.) - 24V (AC/DC) 0.25A (resistive load) (protective resistor 3.3Ω) - Warm up: Approx.1min.(No alarm condition) - One-shot output at detection (Approx.2sec.) - Continuously output when detecting low supply voltage.
Tamper output	- Dry contact output : (N.C.) - 30V (AC/DC) 0.1A (resistive load) - Tamper output : Real time output
Alarm LED	- Red LED - Blinks during warm up (Approx. 1min.) - One shot lights (Approx. 2sec.) at detection - Continuously lights when detecting low supply voltage.A18
Functions	- Low supply voltage alarm - Tamper signal - LED control(L/C) - Alarm LED(ON/OFF) - Sensitivity adjustable between 30% and 170%
Ambient temperature range	+4F to +122F(-20C to +50C) without condensation
Wiring	Terminals
Weight	56oz(1600g)
Appearance	Body: AES resin , Cover: PE resin
Accessories	Water-proof grommet: 1pce, tapping screw: 2pcs