Giao hàng toàn quốc
Giao hàng trong vòng 5h
Đổi trả hàng trong vòng 1 tháng với bất cứ lý do
Thanh toán khi nhận hàng (COD) hoặc chuyển khoản
| Name | Low current photoelectric beam sensor |
| Model | PB-IN-75SW |
| Detection system | Near infrared beam interruption system (TR,-RE, beams simultaneous interruption) |
| Infrared beam | Double modulation pulsed beam by LED |
| Protection distance | Outdoor 250ft (75m) or less |
| Max. arrival distance | Tenfold 2500ft (750m) |
| Response time | 50m sec. to 700m sec. variable (standard 50m sec.) |
| Power supply | 5V to 8V DC or 10V to 30V DC (with-polarity) |
| Power consumption | 5V to 8V DC: 6mA(TR. side 3.7mA) or less when armed 10V to 30V DC: 25mA(TR. side 15mA) or less when armed |
| Alarm output | Dry contact relay Form C Action: Interruption time + off-delay 2 secs. Contact capacity: 30V (AC/DC) 1A |
| Environment output | Dry contact relay Form C Action: an output when environment causes low signal level Contact capacity: 30V (AC/DC) 0.5A |
| Tamper output | Dry contact relay Form B Action: trigger an output when cover is opened Contact capacity: 30V (DC) 0.1A |
| Alarm LED | Red LED (receiver) lights on when an alarm is initiated |
| Sensitivity attenuation LED | Red LED (receiver) lights on when beam reception is attenuated |
| Operation LED | Green LED (transmitter) lights on when cover is opened with power on |
| Additional functions | Four frequencies selection Environmental fade out monitor Beam strength monitor output |
| Beam alignment adjustment | Horizontal : +/-90°, Vertical : +/-10° |
| Ambient temperature range | -13F to +140F (-25C to +60C) |
| Installation | Outdoor |
| Wiring | M3 self-up terminals |
| Weight | Transmitter: 42oz (1200g) Receiver: 45.5oz (1300g) |
| Appearance | PC resin (wine red) |
- Xuất xứ: Nhật Bản.
Mời bạn đánh giá hoặc đặt câu hỏi về PB-IN-75SW(E)