PB-40TE(E)

Photoelectric Twin Beam Sensor Outdoor/Indoor

Giá bán: 3.800.000^đ

Tính năng chính:

Photoelectric Twin Beam Sensor Outdoor/Indoor TAKEX PB-40TE(E)

- Twin beam sensor, intelligent, outdoor 40m.

- Selectable Frequency

+ Includes 4 separate selectable frequencies which can stack up without crosstalk for high security applications.

- High Reliability

+ Synchronized twin beams reduce false alarms caused by flying birds and falling leaves.

+ The outdoor maximum arrival distance is 10 times longer than the operating distance, which allows for reliable operation in poor weather conditions.

- External Light Protection

+ Trouble-free condition in 50,000 lux illumination fluctuation is assured by external light compensation circuit a filter, specially designed, that cuts visible rays effectively. Excellent tolerance against sun light, automobile head light, fluorescent light or mercury light.

- Easy Beam Alignment

+ The special view finder allows for fast aiming and assures good alignment. Equipped with monitor jack to check sensitivity.

- Rotary Optical System

+ The optical system of both the transmitter and receiver can be rotated a full 180degrees which allows for side aiming.

+ Therefore the units do not have to be mounted face to face and the beam direction can not be discerned by simple observation.

- Insect Protection

+ A sealed optical system prevents intrusion and interference by insects.

- Other Features

+ Automatic Gain Control circuit loaded.

+ Wide adjustment (horizontally +/-90degrees, vertically +/-10degrees).

+ Pole mounting kit included.

- Protection Against Frost/Dew

+ As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.

MUA NGAY

Giao hàng toàn quốc

Giao hàng trong vòng 5h

Đổi trả hàng trong vòng 1 tháng với bất cứ lý do

Thanh toán khi nhận hàng (COD) hoặc chuyển khoản

Tư vấn: 0903 189 128

Thông số kỹ thuật

Model	PB-40TE(E)
Detection system	Simultaneous breaking of 2 beams
Infrared beam	LED pulsed beam Double modulation
Protection distance	Outdoor 135'(40m) or less Indoor 270'(80m) or less
Max. beam range	Outdoor 1350'(400m) Indoor 1350'(400m)
Response time	50msec. to 700msec. (Variable at pot)
Supply voltage	12V to 30VDC (Non-polarity)
Current consumption	75mA or less
Alarm output	Dry contact relay output form C Contact action : Interruption time + delay time (1 to 3sec.) Contact capacity : 30V (AC/DC) 0.5A or less
Tamper output	Dry contact relay 1b (N/C) Action : Activated when cover is detached Contact capacity : 30V (AC/DC) 0.5A or less
Alarm LED	Red LED (Receiver) ON: when an alarm is initiated.
Attenuation LED	Red LED (Receiver) ON: when beam is attenuated.
Functions	Beam frequency changeover (4ch.), Monitor jack output, AGC circuit, Frost proof cover
Ambient temperature range	-13F to +140F (-25C to +60C)
Mounting positions	Indoor/Outdoor
Wiring	Terminals
Weight	Transmitter : 13.3oz(380g) Receiver : 14.0oz(400g)
Appearance	PC resin(wine red)