Model sản phẩm:

PB-100ST

Photoelectric Beam Sensor Outdoor
Giá bán:
Tính năng chính:

Photoelectric Beam Sensor Outdoor TAKEX PB-100ST

 

- High Reliability

   + Synchronized twin beams reduce false alarms caused by flying birds and falling leaves.

- External Light Protection

   + Trouble-free condition in 50,000 Ix illumination fluctuation is assured by external light compensation circuit a filter, specially designed, that cuts visible rays effectively. Excellent tolerance against sun light, automobile head light, fluores-cent light or mercury light.

- Easy Beam Alignment

   + The special view finder allows for fast aiming and assures good alignment. Equipped with monitor jack to check sensitivity. Also there is a sensitivity attenuation LED and monitor jack output.

- Rotary Optical System

   + The optical system of both the transmitter and receiver can be rotated a full 180°which allows for side aiming.

   + Therefore the units do not have to be mounted face to face and the beam direction can not be discerned by simple observation.

- Insect Protection

   + An unique rubber grommet prevents insects from entering through the wiring hole.

- Other Features

   + Automatic Gain Control circuit loaded.

   + Wide adjustment (horizontally +/-90°, vertically +/-10°).

   + Tamper output for high security. (Receiver).

   + Polycarbonate cover excellent at anti-shock.

- Protection Against Frost/Dew

   + As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.

 

 


Camera quan sát   Giao hàng toàn quốc
Camera quan sát   Giao hàng trong vòng 5h
Camera quan sát   Đổi trả hàng trong vòng 1 tháng với bất cứ lý do
Camera quan sát   Thanh toán khi nhận hàng (COD) hoặc chuyển khoản
Camera quan sát   Tư vấn: 0903 189 128

 

 

 

Model PB-100ST
Name Photoelectric Beam Sensor
Detection system Simultaneous breaking of 2 beams
Infrared beam LED pulsed beam, Double modulation
Protection distance Outdoor 330ft. (100m)
Max. beam range 3300ft. (1000m)
Response time 50msec. to 700msec. (Variable at pot)
Supply voltage 10V to 30V DC (Non-polarity)
Current consumption 80mA or less
Alarm output Dry contact relay output form C
Contact action:Interruption time+delay time (1 to 3 sec.)
Contact capacity: 30V (AC/DC) 0.5A or less
Tamper output Dry contact relay N/C
Action : Activated when cover is detached
Contact capacity : 30V (AC/DC) 0.1A or less
Alarm LED Red LED (Receiver)
On: when an alarm is initiated
Attenuation LED Red LED (Receiver)
On: when beam is attenuated
Functions Monitor jack output, AGC circuit, Frost proof cover
Ambient temperature range -13F to +140F (-25C to +60C)
Mounting positions Outdoor
Wiring Terminals
Weight Transmitter/Receiver : 42oz (1200g) each
Appearance PC resin (wine red)

- Xuất xứ: Nhật Bản.

 

 

 

 

Mời bạn đánh giá hoặc đặt câu hỏi về PB-100ST

Top