Model sản phẩm:

PB-100F

Photoelectric Beam Sensor Outdoor
Giá bán:
Tính năng chính:

Photoelectric Beam Sensor Outdoor TAKEX PB-100F

- 4 Synchronized High Power Infrared [Patented]

   + 4 beams are 'and-gated', which helps to prevent false alarms by falling leaves and small animals.

   + Active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.

   + External light compensation circuit provides excellent tolerance to sun light, automobile head lights, fluorescent light or mercury light.

- Easy Beam Alignment

   + Audible signal for alignment: Alignment tone aids in quick set-up of beams. The tone becomes maximum at the peak beam level.

   + Sensitivity attenuation LED lights when beam is attenuated, which shows low sensitivity.

   + Monitor jack output.

   + Target color.

   + Wide adjustment (horizontally ±90°,vertically ±10°).

- RoHS Certified Complia

   + Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls, Polybrominated diphenyl ethers.

- Auto-Gain Lock

   + Optimal sensitivity gain is automatically set at any coverage distance within the maximum protection distance. Auto-Gain lock is easily confirmed with sound check.

- Programmed Agc

   + Sensitivity is automatically increased in bad weather to cope with fog, heavy rain, frost or snow.

- Alarm Memory

   + Alarm memory LED located on receiver can be automatically reset.

- Protection Against Frost/Dew

   + Special hoods attached on sensor cover keep beam protection continuing without interruption even when the cover is screened by frost or dew.

- Other Features

   + Tamper output (transmitter and receiver).

   + Polycarbonate cover excellent at anti-shock.

   + Optional accessories.

 


Camera quan sát   Giao hàng toàn quốc
Camera quan sát   Giao hàng trong vòng 5h
Camera quan sát   Đổi trả hàng trong vòng 1 tháng với bất cứ lý do
Camera quan sát   Thanh toán khi nhận hàng (COD) hoặc chuyển khoản
Camera quan sát   Tư vấn: 0903 189 128

 

 

Model PB-100F
Detection system Near infrared beam interruption system (4 beam simultaneous interruption)
Infrared beam Double modulation pulsed beams by LED
Protection distance outdoor 330’(100m) or less
Max. arrival distance 3300’ (1000m)
Response time 50msec. to 700msec. variable (Standard : 50msec.)
Power supply 12V to 30V DC (non-polarity)
Current consumption 70mA or less at protection (max.105mA or less)
Alarm output Dry contact relay: NO or NC (selectable)
Reset: Interruption time + off-delay (approx.1.5sec)
Contact capacity: 30V (AC/DC) 1A or less
Tamper output Dry contact: NC
Contact operation: Output when cover is detached
Contact capacity : 30V (AC/DC) 0.1A or less
Alarm LED Red LED (receiver) lights when an alarm is initiated
Sensitivity attenuation LED Red LED (receiver) lights when beam reception attenuated
Functions Tone indicator, Alarm memory indication,
Programmed AGC, Auto-gain lock,
Monitor jack, Target color
Beam adjustment Horizontal : ±90°, Vertical : ±10°
Ambient temperature range -31°F to +151°F (-35°C to +66°C)
Mounting position Outdoor (IP55)
Wiring Terminals
Weight Transmitter : 42oz (1,200g)
Receiver : 45.5oz (1,300g)
Appearance Resin (wine red)

- Xuất xứ: Nhật Bản.

 

 

 

Mời bạn đánh giá hoặc đặt câu hỏi về PB-100F

Top