PB-50F

Photoelectric Beam Sensor Outdoor

Giá bán: 6.669.000^đ

Tính năng chính:

Photoelectric Beam Sensor Outdoor TAKEX PB-50F

- 4 Synchronized High Power Infrared [Patented]

+ 4 beams are 'and-gated', which helps to prevent false alarms by falling leaves and small animals.

+ Active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.

+ External light compensation circuit provides excellent tolerance to sun light, automobile head lights, fluorescent light or mercury light.

- Easy Beam Alignment

+ Audible signal for alignment: Alignment tone aids in quick set-up of beams. The tone becomes maximum at the peak beam level.

+ Sensitivity attenuation LED lights when beam is attenuated, which shows low sensitivity.

+ Monitor jack output.

+ Target color.

+ Wide adjustment (horizontally ±90°,vertically ±10°).

- RoHS Certified Complia

+ Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls, Polybrominated diphenyl ethers.

- Auto-Gain Lock

+ Optimal sensitivity gain is automatically set at any coverage distance within the maximum protection distance. Auto-Gain lock is easily confirmed with sound check.

- Programmed Agc

+ Sensitivity is automatically increased in bad weather to cope with fog, heavy rain, frost or snow.

- Alarm Memory

+ Alarm memory LED located on receiver can be automatically reset.

- Protection Against Frost/Dew

+ Special hoods attached on sensor cover keep beam protection continuing without interruption even when the cover is screened by frost or dew.

- Other Features

+ Tamper output (transmitter and receiver).

+ Polycarbonate cover excellent at anti-shock.

+ Optional accessories.

MUA NGAY

Giao hàng toàn quốc

Giao hàng trong vòng 5h

Đổi trả hàng trong vòng 1 tháng với bất cứ lý do

Thanh toán khi nhận hàng (COD) hoặc chuyển khoản

Tư vấn: 0903 189 128

Thông số kỹ thuật

Model	PB-50F
Detection system	Near infrared beam interruption system (4 beam simultaneous interruption)
Infrared beam	Double modulation pulsed beams by LED
Protection distance	outdoor 165’(50m) or less
Max. arrival distance	1650’ (500m)
Response time	50msec. to 700msec. variable (Standard : 50msec.)
Power supply	12V to 30V DC (non-polarity)
Current consumption	60mA or less at protection (max.95mA or less)
Alarm output	Dry contact relay : NO or NC (selectable) Reset : Interruption time + off-delay (approx.1.5sec) Contact capacity: 30V (AC/DC) 1A or less
Tamper output	Dry contact : NC Contact operation : Output when cover is detached Contact capacity : 30V (AC/DC) 0.1A or less
Alarm LED	Red LED (receiver) lights when an alarm is initiated
Sensitivity attenuation LED	Red LED (receiver) lights when beam reception attenuated
Functions	Tone indicator, Alarm memory indication, Programmed AGC, Auto-gain lock, Monitor jack, Target color
Beam adjustment	Horizontal : ±90°　Vertical : ±10°
Ambient temperature range	-31°F to +151°F (-35°C to +66°C)
Mounting position	Outdoor (IP55)
Wiring	Terminals
Weight	Transmitter: 42oz (1,200g) Receiver : 45.5oz (1,300g)
Appearance	Resin (wine red)