phone

Giỏ hàng ( 0 )

phone

Tổng đài: 0903 189 128

Phụ kiện Takex

Model sản phẩm:

PA-8410E

Passive Infrared Sensor

Giá bán: 7.589.000^đ

Tính năng chính:

Passive Infrared Sensor TAKEX PA-8410E

- Protection Area Especially Designed To Protect From High Mounting Positions

+ With the unique high-density protection field created by the 4 mirrors equipped inside the unit, it can be used with confidence to protect places with ceilings between 4 and 8 meters high.

- Suitable For Indoor And Outdoor Use

+ With a rain-proof casing, these units are suitable for both internal and external applications.

- Strong housing cases

+ The casings of these units are made from AES resin which improves the unit's resistance to impact.

+ Ideal for use in locations such as sports halls where unit may be subjected to impact.

- External applications

+ The units are constructed with weather-resistant seals to prevent water from entering.

(For exposed wiring, use water-proof grommet or conduit.)

Functions

- L/C (LED control) function

+ The unit is equipped with L/C function by which the LED function can be remotely activated/de-activated.

+ L/C function enables simple walk test functionality after unit is installed.

- A/C (Area control) function

+ The unit is equipped with A/C function by which area coverage can be remotely disabled/enabled.

Other Features

- N.C./N.O. output silent relay

+ Photo MOSFET switch relay engaged at alarm output.

- Tamper Switch

+ The units have independent tamper outputs activated by removal of cover.

- Pulse count selectable (Only applicable to PA-8410E)

+ Pulse count is selectable for one, two, three and four counts.

- Sensitivity adjustment

+ Sensitivity is adjustable for 60%, 80%, 100% and 120%.

MUA NGAY

Camera quan sát

Giao hàng toàn quốc

Camera quan sát

Giao hàng trong vòng 5h

Camera quan sát

Đổi trả hàng trong vòng 1 tháng với bất cứ lý do

Camera quan sát

Thanh toán khi nhận hàng (COD) hoặc chuyển khoản

Camera quan sát

Tư vấn: 0903 189 128

Thông số kỹ thuật

Model	PA-8410E
Detection system	Passive infrared
Coverage	Wide angle 33' (10m) Max. 56 Zones(112 beams)
Coverage adjustment	Vertical : 24° Horizontal : +/-15°
Mounting position	Indoor or outdoor ceiling
Installation height	13'(4m) to 26'(8m)
Supply voltage	9 to 30V DC (non-polarity)
Current consumption	30mA Max.
Alarm output	Dry contact(semi-conductor) output (N.C./N.O.) 24V (AC/DC) 0.25A (resistive load) (protective resistor 3.3Ω) Warm up : Approx.1min.(No alarm condition) One-shot output at detection (Approx.2sec.) Continuously output when detecting functional troubles. Continuously output when detecting low supply voltage.
Tamper output	Dry contact output : (N.C.) 30V (AC/DC) 0.1A (resistive load) Tamper output : Real time output
Alarm LED	Red LED Blinks during warm up (Approx. 1min.) One shot lights (Approx. 2sec.) at detection Continuously lights when detecting functional troubles. Continuously lights when detecting low supply voltage.
Functions	Trouble alarm Low supply voltage alarm Tamper signal LED control(L/C) Area control(A/C) Alarm LED(ON/OFF) Sensitivity adjustable for 60/80/100/120% Pulse count selectable for 1/2/3/4
Ambient temperature range	+4F to +122F(-20C to +50C) without condensation
Wiring	Terminals
Weight	33.25oz (950g)
Appearance	Body : AES resin , Cover : PE resin
Accessories	Water-proof grommet : 1pce, tapping screw: 2pcs

- Xuất xứ: Nhật Bản.

Mời bạn đánh giá hoặc đặt câu hỏi về PA-8410E

Top