Giao hàng toàn quốc
Giao hàng trong vòng 5h
Đổi trả hàng trong vòng 1 tháng với bất cứ lý do
Thanh toán khi nhận hàng (COD) hoặc chuyển khoản
| Model | PA-4810 |
| Product type | Passive infrared sensor |
| Detection system | Passive infrared (Quad, Fuzzy logic) |
| Coverage | Wide angle 12m (40ft) max. |
| Sensitive zones | 18 pairs (72) |
| Mounting positions | indoor wall/pillar |
| Supply voltage | 10 to 30VDC (non-polarity) |
| Current consumption | 32mA max. |
| Alarm output | Dry contact relay (NO/NC changeover) Reset: approx. 2 sec 30V (AC/DC) 0.25A max. (resistive load) (Protective resistance 3.3Ω built-in) |
| Tamper output | Dry contact (NC) Open when cover is detached 30V (AC/DC) 0.1A max. (resistive load) |
| Alarm LED (Red) | Blinking at warm-up (every 0.5 sec) Lighting at alarm (approx. 2 sec) Lighting at memory activated Lighting at trouble alarm (LED disable) |
| Memory control | Controls memory indication/reset with terminal M/C |
| LED control | Controls alarm LED indication with terminal L/C |
| Trouble alarm | Unit trouble: monitors damage on inner circuitry/wiring Operate: initiate trouble alarm Low power voltage: monitors drop in power voltage Operate: initiate trouble alarm |
| Ambient temperature | -10°C to +50°C (+14°F to +122°F) without condensation |
| Wiring | Terminals |
| Area adjustment | Vertically: 20 degrees Horizontally: ±5 degrees |
| Weight | 165g (5.8oz) |
| Supplied accessory | Fixing screw (4 x 30): 2pcs |
- Xuất xứ: Nhật Bản.
Mời bạn đánh giá hoặc đặt câu hỏi về PA-4810