Giao hàng toàn quốc
Giao hàng trong vòng 5h
Đổi trả hàng trong vòng 1 tháng với bất cứ lý do
Thanh toán khi nhận hàng (COD) hoặc chuyển khoản
| Flame sensor part | |
| Detection system | Ultraviolet rays detection (185~260nm) |
| Detection distance | 10m (33ft) max. from 7cm (2.75') flame |
| Detection area angle | Approx. 120 degrees conically |
| Detection setting | Detection timer (1sec, 3sec) Detection sensitivity (H: 100%, L: 50%) Detection sensitivity can be set in 'Individual' ('OR') mode. H: 100% is fixed in 'AND' mode. |
| Alarm LED (RED) | Part of flame sensor Lighting at alarm (detection time + off delay Approx. 2 sec.) Blinking (3 min) and Lighting (47 min) at memory |
| Passive sensor part | |
| Detection system | Passive Infrared |
| Detection area | Wide Angle 10m (33ft) Max. 29 pairs |
| Detection area angle adjustment | 3 steps |
| Alarm LED (RED) | Lighting at alarm (one shot, Approx. 2 sec.) Blinking (3 min) and Lighting (47 min) at memory Lighting at trouble. |
| General | |
| Power supply | 10-30VDC (non-polarity) |
| current consumption | 20mA Max. |
| Alarm output | Individual mode Flame sensor output (From alarm terminal 1) • Dry contact relay (Semi-Conductor) (N.O./N.C. selectable) • Contact operation: Detection time + off delay.(Approx.2sec.) • Contact capacity: 30V (AC/DC) 0.25AMax.(resistive load) Passive sensor output (From alarm terminal 2) • Dry contact relay (Semi-Conductor) (N.O./N.C. selectable) • Contact operation: One shot (Approx. 2 sec.) • Contact capacity:30V(AC/DC) 0.25AMax.(resistive load) AND mode Alarm signal outputs from alarm terminal 1, 2, when both sensors detect during the selected time. • Dry contact relay (Semi-Conductor) (N.O./N.C. selectable) • Contact operation: Min. 2 sec. (Max. depends on AND mode timer setting) • Contact capacity: 30V (AC/DC) 0.25A Max.(resistive load) |
| Tamper output | Dry contact relay NC (Activated when the front cover is detached) Contact capacity: 30V (AC/DC) 0.1A Max. (resistive load) |
| Alarm memory | Reset after blinking (3 min) and lighting (47 min) (Operate flame and passive LED individually) |
| Ambient temperature range | -15°C to +55°C (5°F to +131°F) without condensation |
| Mounting position | Indoor wall surface (Ceiling with option attachment “BCW-401”) |
| Connections | Self-up terminal |
| Weight | Approx. 120g |
- Xuất xứ: Nhật Bản.
Mời bạn đánh giá hoặc đặt câu hỏi về FP-2500E