THEBEN ECO-IR 360C NT

 Features
-         Presence detector (PIR)
-         Square detection area
-         Genuine daylight measurement
-         Light switch output (relay, 230 V)
-         Presence switch output (relay, potential-free)
-         Automatic control of lighting and HVAC as well as room monitoring function
-         Lighting control with light threshold value and self-learning swich-off delay
-         Choice of fully or semi automatic operation
-         Sensor or switch options for manual switching
-         Pulse function for staircase time switch
-         Inrush current limitation for EB
-         HVAC control with switch-on and swich-off delay
-         Room monitoring with selective movement detection
-         Fully or semi-automatic: In 'Fully automatic' mode, the lighting switches on and off automatically according to presence and light. In 'Semi-automatic' mode, it must be switched on manually and it switches off automatically
-         Manual override: The lighting can be manually switched on or off at any time via sensors or switches
-         Room/corridor sensor function: In the 'corridor' setting, the detector functions as a staircase time switch and it cannot be switched off manually
-         The pulse function is for controlling a staircase time switch
-         The inrush current limitation makes the presence detector particularly suitable for switching electronic ballasts (EBs)
-         The presence detector has 'Genuine daylight measurement' and is only suitable for switching fluorescent lamps (FL/PL)
-         Presence switch contact for HVAC control: The switching behaviour of the potential-free contact is only controlled by presence
-         The switch-on delay prevents instantaneous switch on. The contact only closes on completion of the switch-on delay
-         The sensitivity of the presence switch output is reduced in the 'monitoring' position. The contact indicates the presence of people with a high degree of certainty
-         Master/slave parallel switching: Up to ten detectors can be connected with each other to extend the detection area. The master switches the load. All other detectors merely provide presence information as slaves
-         Device can be connected as master or slave
-         Test operation mode checks the detection area and installation
-         A maximum of 10 detectors can be switched at the same time
-         The switching behaviour of the presence detector is controlled by presence and light
-         The self-learning switch-off delay adjusts to occupants' behaviour
-         The square detection area allows accurate and simple planning
 
Specifications

 
-         Hãng sản xuất THEBEN của Đức.