elay
- The presence detector has 'Genuine daylight measurement' and is only suitable for switching fluorescent lamps (FL/PL)
- Presence switch contact for HVAC control: The switching behaviour of the potential-free contact is only controlled by presence
- The parameters are set via the potentiometer
- The switching behaviour of the presence detector is controlled by presence and light
- The self-learning switch-off delay adjusts to occupants' behaviour
- The square detection area allows accurate and simple planning
Specifications
Operating voltage |
24 V AC/DC |
Recommended installation height |
2 – 3,5 m |
Installation type |
Ceiling installation |
Power consumption |
0,3 W |
Light measurement |
Genuine daylight measurement |
Setting range brightness |
50 – 1600 lx |
Light switch-off delay |
2 min-15 min |
Type of contact light |
Relay potential-free |
Lamps |
Fluorescent lamps |
Compact and flourescent lamps |
50 W (24 V AC/DC), 460 VA (230 V AC), µ, minimal 1 V/1 mA |
Presence switch-off delay |
1-60 min |
Type of contact presence |
Relay potential-free |
Switching capacity presence |
50 W (24 V AC/DC), 460 VA (230 V AC), µ, minimal 1 V/1 mA |
Switching output |
Potential-free |
Type of connection |
Spring terminals |
Max. cable cross section |
1,5 mm² |
Mounting plate |
70 x 70 mm |
Size of concealed housing |
55 mm (NIS, PMI) |
Ambient temperature |
+0 °C … +50 °C |
Protection class |
II as per EN 60 730-1 |
Type of protection |
IP 40 |
- Hãng sản xuất THEBEN của Đức.
Mời bạn đánh giá hoặc đặt câu hỏi về THEBEN ECO-IR 360-24V